• Proudly Designed and Made in USA
• High Profile P.O.I® (Precision Optics Interface) Rings Have a 33mm Center Height to Fit Optics with a 1″ Tube, and up to a 65mm Outer Objective
• The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings –
  a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
  b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
  c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
• UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size

NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.

Material: Aluminum/Steel
Weight: 2.8oz
Pieces: 2
Rail Type: Picatinny
Profile Level: High
Ring Diameter: 1in
Ring Width: 22mm
Max. Scope Outer Dia: 65mm
Screws per Ring: 4
A: 1in
B: 22mm
C: 20mm
D: N/A
E: N/A