GIVE BAKED-ON CARBON A THOROUGH BEAT DOWN

The AR10 Scraper saves cleaning time by removing built-up fouling fast. Its precision made to match 12 surfaces on all 4 major parts of the bolt carrier group: the bolt carrier, bolt, bolt cam pin, and firing pin. A punch for the firing pin retaining pin is located at the front for quick disassembly.

Retaining pin removal makes breakdown easy
A specially cut retaining pin punch quickly and easily removes the AR10 retaining pin for bolt carrier group disassembly.
11 machined profiles
Precision cut faces on the carbon scraper quickly clean all external and internal surfaces on the bolt, bolt carrier, firing pin (large and small), and cam pin.
Each surface is precision milled to out-clean anything else on the market.
Clean the bolt

One twist cleans the inside and outside of the bolt tail as well as the bolt tail shoulder. Then proceed to scrape between the lugs, the bolt face, and behind the cartridge extractor.
Clean the bolt carrier
One quick twist inside the bolt carrier leaves two interior surfaces carbon free and hang-up free.
Clean the firing pin
Easily cleans both the large and small section of the firing pin with two precision scraping surfaces.
Clean the cam pin
The precision tolerances of the milled surface allow for easy and thorough scraping of your AR10s cam pin.

Product overview

Firing pin (large dia.)
Firing pin (small dia.)
Bolt cam pin
Bolt carrier scraper (2)
Bolt tail interior
Bolt tail exterior
Bolt tail shoulder
Bolt waist
Between bolt lugs
Bolt face
Behind-cartridge extractor
Retaining pin punch 1/4″ bit driver
Bottle opener